WWWBoard New Message: Message 141: FS4000US SCSI does not work WWWBoard: Message 141 [ Follow Ups ] [ Post Followup ] [ ]    Posted by George Klass on 06/28/02 at 7:42 AM Subject:   FS4000US SCSI does not work Message Posted It works ell with USB but I cannot get it to work with my IOMEGA SCSI card. Have tried changing ID numbers. I also have a HP6250 scanner connected on the same SCSI line (it works perfectly)through the FS4000. I have ensured different id's and also SCSI termination is at the HP scanner.Have also tried FS4000 exclusively on the SCSI port without success. Does anyone have any suggestions?    Follow Ups:   Re: FS4000US SCSI does not work Jeff Hunter   Posted at: 07/09/02 (0)   Re: FS4000US SCSI does not work Jim Lewis   Posted at: 07/07/02 (4)   Re: FS4000US SCSI does not work George Klass   Posted at: 07/09/02 (3)   Re: FS4000US SCSI does not work Jeff Hunter   Posted at: 07/15/02 (0)   SCSI and APTI Jim Lewis   Posted at: 07/10/02 (0)   Re: FS4000US SCSI does not work Jim Lewis   Posted at: 07/10/02 (0)   Re: FS4000US SCSI does not work WWWBoard Administrator   Posted at: 06/28/02 (0) Post a Followup Name: E-Mail: Subject: Message to Post : It works ell with USB but I cannot get it to work with my IOMEGA SCSI card. Have tried changing ID numbers. I also have a HP6250 scanner connected on the same SCSI line (it works perfectly)through the FS4000. I have ensured different id's and also SCSI termination is at the HP scanner.Have also tried FS4000 exclusively on the SCSI port without success. Does anyone have any suggestions?   [ Posting Rules | Follow Ups | Return to WWWBoard ]